Genset Division

Known for the ruggedness, reliability of Ashok Leyland make engines, the company takes pride in having powered over 150,000 plus diesel generators over last ten years. This incredible confidence has made Ashok Leyland to enhance the offering to wider range of engines from 5 kVA to 2250 kVA. Ashok Leyland engines are aesthetically designed, highly fuel efficient, environment-friendly and are low on operating costs.

• 1) Reliable, Robust & Rugged engines designed to deliver continuously in arduous environment
• 2) Better Block Loading Capability
• 3) Compact engine - Engineered for Optimized Power Solutions
• 4) Low Ownership Cost
• 5) Low Oil & Fuel consumption
• 6) Continuous duty Power rating
• 7) Minimal vibrations and lower noise levels
• 8) Easy Serviceability & Repairability
• 9) Standardized Design for complete range
• 10) Wide after-sales & parts support
View Product
Get A Quote

Distrbution & Power Transformers

Subjected to rigorous and strict quality controls at every stage of manufacturing, Designed to meet latest national international standards like BIS, IS, IEC, ANSI, BS, DIN, etc., Wide range of Transformers duly tested at Central Power Research Institute, Bangalore , Bhopal Quality assurance programme available

• 1)Tube Mills
• 2) Telecom Centers
• 3) Rice Mills
• 4) Rolling Plants
• 5) Educational Institutions
• 6) Cold Storage
View Product
Get A Quote

Industrial Transformers

It is designed for 30-35 degree C above ambient. Suitable for any kind of ambient temperature conditions. Core is constructed from Low Loss of CRGO M-4 Grade confirming to latest standards & is fitted & clamped with special built in-house frames to reduce the magnetic noise & to make the structure rigid & robust.

Use paper covered electrolytic grade copper strip for winding. Cooling ducts are provided to keep the hot spot temperature as low as possible. Tanks are made of M.S. Sheets with adequate bracing & stiffeners are given a coat of Epoxy Primer & Epoxy paint for better life. Both light grey & Siemens grey (RAL 7032) are available in colour.

DRY TYPE TRANSFORMER

Dry type transformers are suitable for indoor installations in explosive atmospheric areas and populated locations such as malls, multiplex etc. These dry type transformers have F or H insulation class with or without enclosure as per the site requirement.

Dry transformers are very compact in sizes and hence suitable for basement installations in high rise buildings etc. Dry transformers are available with low losses giving savings over long service periods. Periodical vacuum cleaning of winding surface is the only maintenance. The capacity range of these iron core transformer is up to 2000 KVA with primary Voltage up to 11 KV class & secondary Voltage between 433 to 6600 Volts.

H.T. Transformer

Even after the installation of standard off circuit distribution transformer, the voltage fluctuation on the LT side persists due to limited range of voltage correction of the transformer. To control the voltage fluctuations, it is ideal to install Servo Controlled Automatic Voltage Controller either on LT side or HT side.

SERVOMAX make Transformers with built-in rolling contact type AVR suitable for indoor/outdoor installation, copper wound HT Two-in-one system is a revolutionary landmark in the industry when it comes to voltage regulation and stabilization. Even after the installation of standard distribution transformer the problem of low/high voltage on the LT side persists, resulting in improper operation of the electrical equipments, premature failure & production loss of a plant.

H.T. Automatic Voltage Regulator

Even after the installation of standard off circuit distribution transformer, the voltage fluctuation on the LT side persists due to limited range of voltage correction of the transformer. To control the voltage fluctuations, it is ideal to install Servo Controlled Automatic Voltage Controller either on LT side or HT side.

SERVOMAX make Transformers with built-in rolling contact type AVR suitable for indoor/outdoor installation, copper wound HT Two-in-one system is a revolutionary landmark in the industry when it comes to voltage regulation and stabilization. Even after the installation of standard distribution transformer the problem of low/high voltage on the LT side persists, resulting in improper operation of the electrical equipments, premature failure & production loss of a plant.

Furnace Transformers

Multiple Shielding Techniques employed to reduce the inter winding capacitance to below 0.005 picofarad and increases DC Isolation to over 1000 Megaohms.

Technically any transformer that has no direct current path between its primary & secondary windings provides isolation from any kind of leakage in Current, Spikes/Surges produced in the system. Provision of electrostatic shield in between primary & secondary winding depends upon its construction, specification & performance characteristics.

Isolation / Ultra Isolation Transformer are being used to protect Electronic & Sophisticated equipments, CNC Machines from the excessive line voltage transients, spikes / surges produced in the system. Electrostatic shielding helps in grounding these spikes & not allowing to pass on to the secondary side of the transformer.

VRLA - NEPST & NMST RANGE

This valve regulated lead-acid battery range has a design life of 20 years at 27°C under ideal float condition. The capacity of these batteries ranges from 200Ah to 6000 Ah at 27°C down to 1.75 VPC. The operating temperature range is -5°C to 40°C.

• 1)These batteries give 1800 cycles at 50% DOD.
• 2) Excellent recovery from deep discharge.
• 3) Antimony free alloy is used and hence self-discharge is less than 0.5% per week of C10 capacity at 27°C.
• 4) Factory charged and ready to use, hence no delay between receipt and use resulting in instant power source.
• 5) No water topping up required ever resulting in saving of hundreds of liters of distilled water and manpower required for topping up throughout life of battery.
• 6) The gas recombination technology cycle effectively nullifies generation of gas during normal use resulting in no emission of corrosive fumes under normal operative conditions and hence no elaborate air exhaust system is required.
View Product
Get A Quote

GEL TUBULAR - GTB RANGE

Exide offers GTB range in Tubular Gel VRLA Battery in the Telecom sector. The GTB Range of Capacity ranging from 200 Ah to 600 Ah @ 35°C down to 1.75 VPC.

• 1) The cycle life at 35 degree Celsius is 3000 cycles at 50% DOD..
• 2) The performance of GTB batteries conforms to IEC 61427, IEC 60896-21/22 & TEC Spec No. TEC/GR/TX/BAT-003/02 MAR 2011.
• 3) Rugged and reliable for cyclic application, ideal for frequent discharge-charge cycle.
• 4) Very low self-discharge.
• 5) No water topping up ever.
• 6) TLow electrical resistance, high charging efficiency.
View Product
Get A Quote

TRACTION & MOTIVE POWER

TRACTION & MOTIVE POWER

Over the years, Exide batteries have become the driving force in principal economic sectors globally. In many critical sectors batteries are essential to start electrically operated equipment and keep them running in absence of main power. Forklift Trucks in Material Handling applications, Mining Locomotives, Golf Cart, Electric Vehicles, Naval applications - all depend on Exide to fulfil their needs for start-up and motive power. Exide Traction Batteries are supplied to one of the world's leading OEM Electric Truck Manufacturer in Germany, the country which is Exide's main Traction market after India.

FLOODED HSP CLASSIC RANGE AND FLOODED GEN-X RANGE

Flooded HSP Classic Range The very popular and ever dependent HSP range has been powering various makes of forklifts for more than two decades. The HSP range is available in BS and DIN range from 58Ah to 841 Ah in BS and 120Ah to 1400Ah in DIN. Available in both British and Continental standards, the HSP range can fit into all the makes of forklifts.

Flooded Gen-X Range

The Exide Gen-X range comes with 15% additional capacity in the same dimensions of the HSP range. The higher diameter of the gauntlet tubes increases the annular volume resulting in increased power. The advance formula of Red lead and Grey oxide used in the positive active material ensures increased power and long life. The Exide Gen-X range of batteries is at the highest technology level and has very high efficiency.

NDP & HDP TUBULAR RANGE

Exide Tubular batteries in PP & Transparent SAN containers are time-tested and have an outstanding track record. The batteries have Tubular plates specially cast in High Pressure HADI machines to battle corrosion effectively and ensure longevity. These low-maintenance batteries are extremely abuse-resistant and can operate under arduous conditions with great reliability and efficiency. Exide Tubular cells have built their reputation on their long standing ability to provide instant power to equipment. These batteries have excellent discharge performance, besides offering long and reliable service life. These are ideal for frequent charge/ discharge cycles and have low self-discharge, superior all round voltage profile and energy (Wh) output. These Tubular batteries recharge rapidly and have higher Ampere-hour and Watt-hour efficiencies. These batteries conform to IS 1651: 2013. Exide Tubular batteries are ideal for cyclic applications and are very commonly used in Transmission & Distribution, Power, Cement, Steel, Oil & Gas and Petrochemical sectors.

TBS / OPZS RANGE

A truly reliable standby battery needs to consider a divergent mix of variables like load, its duration and DC bus voltage window, expected frequency and depth of discharge, ambient temperature, criticality of operations and charging facility. Exide TBS tubular batteries are a great choice since these are tailored to meet all this need. These are rugged batteries with Exide Torr Tubular technology. The facility of measuring specific gravity of the electrolyte, voltage and temperature of cells allows anomalies to be detected well in advance. This makes preventive maintenance very easy and readiness during emergency discharge is always ensured. Exide TBS batteries offer a service life of around 15 years in diverse standby float applications. The batteries have been designed to be user-friendly, require very low maintenance and can withstand high ambient temperatures. These batteries conform to IS 1651 : 2013

Flooded 6EL Range

The new EL range is manufactured as per Exide's proprietary Torr Tubular Technology using one of the world's most exclusive, advanced and state-of-the-art "HADI" high pressure spine casting (at 100 bar) machines, which is not commonly available. With our hi-tech R&D centre at Kolkata, Exide has developed the high corrosion-resistant and robust spine technology using the HADI process which ensures a superfine grain structure for strength, long life and highest reliability.